Epoxy Casting Resin 10kg 490-520

Epoxy Casting Resin 10kg

Epoxy Casting Resin 10kg 490-520



ex. VAT
Epoxy casting resin and hardener, 10kg. This is a two component, aluminium filled epoxy that hardens at room temp. It can be cast to 60-70mm thick in one operation. Larger sections can either be cast in layers or with the addition of 80% aluminium granules up to 120mm thick. Heat resistant and can be drilled and machined.

Due to the low exothermic reaction, sections less than 30mm thick or low volumes should be cast with the addition of accelerator (included). It should be post cured before use, this can be achieved by curing at 60-90°c for 4-6 hours after it has hardened at room temp.

Applications: elevated temp tooling, vacuum form tools, foam tools, wax injection tools, RIM tool, RTM tools, backing for metal spray tools.
Weight (g) 10700

The following downloads are available for this product...


For delivery information, please click here.


Find support material for each of our product ranges.


Have a question? See if we can help.

Can't Find it?

We can source D&T products which don't appear on our website or catalogues.