Technology Supplies Ltd Land and Sea Vehicle Moulds

View the contents of your shopping cart.

Go straight to the checkout.

To search our online catalogue for a particular product or product code, use the search function below.

Main Menu > Design Technology > Vacuum Forming Moulds > Land and Sea Vehicle Moulds

	Aquaforce 1Moulds Ref: 300-164 Set of Vacuum Forming Moulds for Aquaforce 1 (300-124 & 300-123) £94.00(Excluding: VAT at 17.5%)


	Vehicle Chassis Mould Ref: 300-254 This mould produces a moulded vehicle chassis which can form the basis of a variety of different vehicles. It can be made with a fixed front axle or with stub axles which can be steered. It will accommodate the simple gearbox (250-125) and an electric motor or a pulley drive to the rear axle. There is plenty of scope for further design and development. The overall size of the chassis is 250 x 85mm. Axle spacing 185mm. It is best made in 1 or 1.5mm HIPS. The mould is made from a very durable aluminium epoxy resin which will produce moulding after moulding without deterioration. It is mounted on a base board 430mm x 225mm and will fit Clarkes 917 and 725 Formech 300X and Satro vacuum forming machines. £66.95(Excluding: VAT at 17.5%)


	Vehicle Chassis Mould (1210) Ref: 300-254X This mould produces a moulded vehicle chassis which can form the basis of a variety of different vehicles. It can be made with a fixed front axle or with stub axles which can be steered. It will accommodate the simple gearbox (250-125) and an electric motor or a pulley drive to the rear axle. There is plenty of scope for further design and development. The overall size of the chassis is 250 x 85mm. Axle spacing 185mm. It is best made in 1 or 1.5mm HIPS. The mould is made from a very durable aluminium epoxy resin which will produce moulding after moulding without deterioration. It is mounted on a base board 275mm x 200mm and will fit Clarkes 1210 vacuum forming machine. £66.95(Excluding: VAT at 17.5%)


	Car Body Mould Ref: 300-261 This mould provides a coupe style car body which can be fitted to a chassis and drive of the students own design or to the chassis moulding from the mould above. The overall size is 265 long 130 at widest 85 narrowest 75mm high. It is best made from 1 or 1.5mm HIPS. The mould is made from a very durable aluminium epoxy resin which will produce moulding after moulding without deterioration. It is mounted on a base board 430mm x 225mm and will fit Clarkes 917 and 725 Formech 300X and Satro vacuum forming machines. Tip: To obtain realistic windows and lights first mould in 0.5mm clear PVC. Over mould with coloured material. Separate the two mouldings. Cut out the windows in the coloured piece then re-assemble. £87.95(Excluding: VAT at 17.5%)


	Car Body Mould (1210) Ref: 300-261X This mould provides a coupe style car body which can be fitted to a chassis and drive of the students own design or to the chassis moulding from the mould above. The overall size is 265 long 130 at widest 85 narrowest 75mm high. It is best made from 1 or 1.5mm HIPS. The mould is made from a very durable aluminium epoxy resin which will produce moulding after moulding without deterioration. It is mounted on a base board 275mm x 200mm and will fit Clarkes 1210 vacuum forming machine. Tip: To obtain realistic windows and lights first mould in 0.5mm clear PVC. Over mould with coloured material. Separate the two mouldings. Cut out the windows in the coloured piece then re-assemble. £87.95(Excluding: VAT at 17.5%)


	Super Vehicle Mould Set Ref: 300-271 This set of two moulds produce the formings which are part of the Sirocco project pack. These can be built into a futuristic shaped motorised boat or a wheeled vehicle and can be driven by airscrew water propellor or with gears. Other features can be added and lots of electronics could be incorporated. The mould is made from a very durable aluminium epoxy resin which will produce moulding after moulding without deterioration. It is mounted on a base board 430mm x 225mm and will fit Clarkes 917 and 725 Formech 300X and Satro vacuum forming machines. £142.99(Excluding: VAT at 17.5%)


	Super Vehicle Mould Set (1210) Ref: 300-271X This set of three moulds produce the formings which are part of the Sirocco project pack. These can be built into a futuristic shaped motorised boat or a wheeled vehicle and can be driven by airscrew water propellor or with gears. Other features can be added and lots of electronics could be incorporated. The mould is made from a very durable aluminium epoxy resin which will produce moulding after moulding without deterioration. It is mounted on a base board 275mm x 200mm and will fit Clarkes 1210 vacuum forming machines. £125.99(Excluding: VAT at 17.5%)

On-line ordering and printed catalogues are reserved for educational establishments. If contacting us regarding a web enquiry/order please quote the reference TSWEB.

Please Note: Only schools who have accounts with us can register to use our online ordering system. If you are an individual with an order enquiry please contact our sales office. Our contact details can be found here.

We would appreciate it if you took the time to complete our online ordering survey and our general website survey which can be found here.
.